加工性能及特點：

用于鋁合金型材組角連接。

l 采用可編程控制器（PLC）控制，保證了設備運行的穩定性及可靠性。

l 一次裝夾同時沖鉚兩個角，工作效率高。

l 設有壓緊氣缸、内、外定位塊及型材預緊機構，避免了組角錯位，提高了定位精度和工作效率。

l 内、外定位塊上下可調，并可疊加使用，保證了定位的準确性。

l 液壓系統通過高低壓轉換，實現二次擠壓功能，保證獲得更高的組角強度。

l 組角刀前後左右調整方便，适應加工不同型材的需要。

l 高精度直線軸承導軌副，可長期保持精度。

技(jì )術參數：

   輸入電源 380V/50HZ          總功率 3.0KW

   額定油壓 15Mpa                油箱容量40L

   工作氣壓 0.4－0.6Mpa        耗氣量 30L/min

   組角缸運動行程 0-60mm       适應型材最大寬度 90mm

   加工尺寸 480-3000mm      重  量   1000kg

  外形尺寸4000×2200×1750mm

Processing Performance and Features

Used for corner combination of aluminum alloy profile.

Two corners connecting at one time is available with high efficiency production.

It is equipped with the preload device so as to avoid dislocation of the corner when combination and improved the precision of the localization and working efficiency.

Inner/ outer located block can be adjustable vertically, also can be used for processing with multi-layers piled up so that ensure the localization accuracy.

Hydraulic system through high and low voltage conversion to realize the second pressing function so that ensure the higher intensity of corner combination.

The combination cutter can easily adjusting from front to back and left to right, is suitable for the demand of processing different profiles.

High precision linear guiding pair ensured steady and long-term processing accuracy.

Technical Parameter

Processing Precision:

Diagonal seam tolerance≤0.15mm